java.awt.geom
Class GeneralPath

java.lang.Object
  extended byjava.awt.geom.GeneralPath
All Implemented Interfaces:
Cloneable, Shape

public final class GeneralPath
extends Object
implements Shape, Cloneable

The GeneralPath class represents a geometric path constructed from straight lines, and quadratic and cubic (Bézier) curves. It can contain multiple subpaths.

The winding rule specifies how the interior of a path is determined. There are two types of winding rules: EVEN_ODD and NON_ZERO.

An EVEN_ODD winding rule means that enclosed regions of the path alternate between interior and exterior areas as traversed from the outside of the path towards a point inside the region.

A NON_ZERO winding rule means that if a ray is drawn in any direction from a given point to infinity and the places where the path intersects the ray are examined, the point is inside of the path if and only if the number of times that the path crosses the ray from left to right does not equal the number of times that the path crosses the ray from right to left.

Author:
Jim Graham

Field Summary
(package private) static int EXPAND_MAX
           
(package private) static int INIT_SIZE
           
(package private)  int numCoords
           
(package private)  int numTypes
           
(package private)  float[] pointCoords
           
(package private)  byte[] pointTypes
           
private static byte SEG_CLOSE
           
private static byte SEG_CUBICTO
           
private static byte SEG_LINETO
           
private static byte SEG_MOVETO
           
private static byte SEG_QUADTO
           
static int WIND_EVEN_ODD
          An even-odd winding rule for determining the interior of a path.
static int WIND_NON_ZERO
          A non-zero winding rule for determining the interior of a path.
(package private)  int windingRule
           
 
Constructor Summary
  GeneralPath()
          Constructs a new GeneralPath object.
  GeneralPath(int rule)
          Constructs a new GeneralPath object with the specified winding rule to control operations that require the interior of the path to be defined.
(package private) GeneralPath(int windingRule, byte[] pointTypes, int numTypes, float[] pointCoords, int numCoords)
           
  GeneralPath(int rule, int initialCapacity)
          Constructs a new GeneralPath object with the specified winding rule and the specified initial capacity to store path coordinates.
(package private) GeneralPath(int rule, int initialTypes, int initialCoords)
          Constructs a new GeneralPath object with the specified winding rule and the specified initial capacities to store point types and coordinates.
  GeneralPath(Shape s)
          Constructs a new GeneralPath object from an arbitrary Shape object.
 
Method Summary
 void append(PathIterator pi, boolean connect)
          Appends the geometry of the specified PathIterator object to the path, possibly connecting the new geometry to the existing path segments with a line segment.
 void append(Shape s, boolean connect)
          Appends the geometry of the specified Shape object to the path, possibly connecting the new geometry to the existing path segments with a line segment.
 Object clone()
          Creates a new object of the same class as this object.
 void closePath()
          Closes the current subpath by drawing a straight line back to the coordinates of the last moveTo.
 boolean contains(double x, double y)
          Tests if the specified coordinates are inside the boundary of this Shape.
 boolean contains(double x, double y, double w, double h)
          Tests if the specified rectangular area is inside the boundary of this Shape.
 boolean contains(Point2D p)
          Tests if the specified Point2D is inside the boundary of this Shape.
 boolean contains(Rectangle2D r)
          Tests if the specified Rectangle2D is inside the boundary of this Shape.
 Shape createTransformedShape(AffineTransform at)
          Returns a new transformed Shape.
 void curveTo(float x1, float y1, float x2, float y2, float x3, float y3)
          Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the coordinates (x3, y3), using the specified points (x1, y1) and (x2, y2) as Bézier control points.
 Rectangle getBounds()
          Return the bounding box of the path.
 Rectangle2D getBounds2D()
          Returns the bounding box of the path.
 Point2D getCurrentPoint()
          Returns the coordinates most recently added to the end of the path as a Point2D object.
 PathIterator getPathIterator(AffineTransform at)
          Returns a PathIterator object that iterates along the boundary of this Shape and provides access to the geometry of the outline of this Shape.
 PathIterator getPathIterator(AffineTransform at, double flatness)
          Returns a PathIterator object that iterates along the boundary of the flattened Shape and provides access to the geometry of the outline of the Shape.
 int getWindingRule()
          Returns the fill style winding rule.
 boolean intersects(double x, double y, double w, double h)
          Tests if the interior of this Shape intersects the interior of a specified set of rectangular coordinates.
 boolean intersects(Rectangle2D r)
          Tests if the interior of this Shape intersects the interior of a specified Rectangle2D.
 void lineTo(float x, float y)
          Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates.
 void moveTo(float x, float y)
          Adds a point to the path by moving to the specified coordinates.
private  void needRoom(int newTypes, int newCoords, boolean needMove)
           
 void quadTo(float x1, float y1, float x2, float y2)
          Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the coordinates (x2, y2), using the specified point (x1, y1) as a quadratic parametric control point.
 void reset()
          Resets the path to empty.
 void setWindingRule(int rule)
          Sets the winding rule for this path to the specified value.
 void transform(AffineTransform at)
          Transforms the geometry of this path using the specified AffineTransform.
 
Methods inherited from class java.lang.Object
equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Field Detail

WIND_EVEN_ODD

public static final int WIND_EVEN_ODD
An even-odd winding rule for determining the interior of a path.

See Also:
Constant Field Values

WIND_NON_ZERO

public static final int WIND_NON_ZERO
A non-zero winding rule for determining the interior of a path.

See Also:
Constant Field Values

SEG_MOVETO

private static final byte SEG_MOVETO
See Also:
Constant Field Values

SEG_LINETO

private static final byte SEG_LINETO
See Also:
Constant Field Values

SEG_QUADTO

private static final byte SEG_QUADTO
See Also:
Constant Field Values

SEG_CUBICTO

private static final byte SEG_CUBICTO
See Also:
Constant Field Values

SEG_CLOSE

private static final byte SEG_CLOSE
See Also:
Constant Field Values

pointTypes

byte[] pointTypes

pointCoords

float[] pointCoords

numTypes

int numTypes

numCoords

int numCoords

windingRule

int windingRule

INIT_SIZE

static final int INIT_SIZE
See Also:
Constant Field Values

EXPAND_MAX

static final int EXPAND_MAX
See Also:
Constant Field Values
Constructor Detail

GeneralPath

public GeneralPath()
Constructs a new GeneralPath object. If an operation performed on this path requires the interior of the path to be defined then the default NON_ZERO winding rule is used.

See Also:
WIND_NON_ZERO

GeneralPath

public GeneralPath(int rule)
Constructs a new GeneralPath object with the specified winding rule to control operations that require the interior of the path to be defined.

Parameters:
rule - the winding rule
See Also:
WIND_EVEN_ODD, WIND_NON_ZERO

GeneralPath

public GeneralPath(int rule,
                   int initialCapacity)
Constructs a new GeneralPath object with the specified winding rule and the specified initial capacity to store path coordinates. This number is an initial guess as to how many path segments are in the path, but the storage is expanded as needed to store whatever path segments are added to this path.

Parameters:
rule - the winding rule
initialCapacity - the estimate for the number of path segments in the path
See Also:
WIND_EVEN_ODD, WIND_NON_ZERO

GeneralPath

GeneralPath(int rule,
            int initialTypes,
            int initialCoords)
Constructs a new GeneralPath object with the specified winding rule and the specified initial capacities to store point types and coordinates. These numbers are an initial guess as to how many path segments and how many points are to be in the path, but the storage is expanded as needed to store whatever path segments are added to this path.

Parameters:
rule - the winding rule
initialTypes - the estimate for the number of path segments in the path
See Also:
WIND_EVEN_ODD, WIND_NON_ZERO

GeneralPath

public GeneralPath(Shape s)
Constructs a new GeneralPath object from an arbitrary Shape object. All of the initial geometry and the winding rule for this path are taken from the specified Shape object.

Parameters:
s - the specified Shape object

GeneralPath

GeneralPath(int windingRule,
            byte[] pointTypes,
            int numTypes,
            float[] pointCoords,
            int numCoords)
Method Detail

needRoom

private void needRoom(int newTypes,
                      int newCoords,
                      boolean needMove)

moveTo

public void moveTo(float x,
                   float y)
Adds a point to the path by moving to the specified coordinates.


lineTo

public void lineTo(float x,
                   float y)
Adds a point to the path by drawing a straight line from the current coordinates to the new specified coordinates.


quadTo

public void quadTo(float x1,
                   float y1,
                   float x2,
                   float y2)
Adds a curved segment, defined by two new points, to the path by drawing a Quadratic curve that intersects both the current coordinates and the coordinates (x2, y2), using the specified point (x1, y1) as a quadratic parametric control point.


curveTo

public void curveTo(float x1,
                    float y1,
                    float x2,
                    float y2,
                    float x3,
                    float y3)
Adds a curved segment, defined by three new points, to the path by drawing a Bézier curve that intersects both the current coordinates and the coordinates (x3, y3), using the specified points (x1, y1) and (x2, y2) as Bézier control points.


closePath

public void closePath()
Closes the current subpath by drawing a straight line back to the coordinates of the last moveTo. If the path is already closed then this method has no effect.


append

public void append(Shape s,
                   boolean connect)
Appends the geometry of the specified Shape object to the path, possibly connecting the new geometry to the existing path segments with a line segment. If the connect parameter is true and the path is not empty then any initial moveTo in the geometry of the appended Shape is turned into a lineTo segment. If the destination coordinates of such a connecting lineTo segment match the ending coordinates of a currently open subpath then the segment is omitted as superfluous. The winding rule of the specified Shape is ignored and the appended geometry is governed by the winding rule specified for this path.

Parameters:
s - the Shape whose geometry is appended to this path
connect - a boolean to control whether or not to turn an initial moveTo segment into a lineTo segment to connect the new geometry to the existing path

append

public void append(PathIterator pi,
                   boolean connect)
Appends the geometry of the specified PathIterator object to the path, possibly connecting the new geometry to the existing path segments with a line segment. If the connect parameter is true and the path is not empty then any initial moveTo in the geometry of the appended Shape is turned into a lineTo segment. If the destination coordinates of such a connecting lineTo segment match the ending coordinates of a currently open subpath then the segment is omitted as superfluous. The winding rule of the specified Shape is ignored and the appended geometry is governed by the winding rule specified for this path.

Parameters:
pi - the PathIterator whose geometry is appended to this path
connect - a boolean to control whether or not to turn an initial moveTo segment into a lineTo segment to connect the new geometry to the existing path

getWindingRule

public int getWindingRule()
Returns the fill style winding rule.

Returns:
an integer representing the current winding rule.
See Also:
WIND_EVEN_ODD, WIND_NON_ZERO, setWindingRule(int)

setWindingRule

public void setWindingRule(int rule)
Sets the winding rule for this path to the specified value.

Parameters:
rule - an integer representing the specified winding rule
Throws:
IllegalArgumentException - if rule is not either WIND_EVEN_ODD or WIND_NON_ZERO
See Also:
WIND_EVEN_ODD, WIND_NON_ZERO, getWindingRule()

getCurrentPoint

public Point2D getCurrentPoint()
Returns the coordinates most recently added to the end of the path as a Point2D object.

Returns:
a Point2D object containing the ending coordinates of the path or null if there are no points in the path.

reset

public void reset()
Resets the path to empty. The append position is set back to the beginning of the path and all coordinates and point types are forgotten.


transform

public void transform(AffineTransform at)
Transforms the geometry of this path using the specified AffineTransform. The geometry is transformed in place, which permanently changes the boundary defined by this object.

Parameters:
at - the AffineTransform used to transform the area

createTransformedShape

public Shape createTransformedShape(AffineTransform at)
Returns a new transformed Shape.

Parameters:
at - the AffineTransform used to transform a new Shape.
Returns:
a new Shape, transformed with the specified AffineTransform.

getBounds

public Rectangle getBounds()
Return the bounding box of the path.

Specified by:
getBounds in interface Shape
Returns:
a Rectangle object that bounds the current path.
See Also:
Shape.getBounds2D()

getBounds2D

public Rectangle2D getBounds2D()
Returns the bounding box of the path.

Specified by:
getBounds2D in interface Shape
Returns:
a Rectangle2D object that bounds the current path.
See Also:
Shape.getBounds()

contains

public boolean contains(double x,
                        double y)
Tests if the specified coordinates are inside the boundary of this Shape.

Specified by:
contains in interface Shape
Parameters:
x - the specified x coordinate
y - the specified y coordinate
Returns:
true if the specified coordinates are inside this Shape; false otherwise

contains

public boolean contains(Point2D p)
Tests if the specified Point2D is inside the boundary of this Shape.

Specified by:
contains in interface Shape
Parameters:
p - the specified Point2D
Returns:
true if this Shape contains the specified Point2D, false otherwise.

contains

public boolean contains(double x,
                        double y,
                        double w,
                        double h)
Tests if the specified rectangular area is inside the boundary of this Shape.

Specified by:
contains in interface Shape
Parameters:
w - the width of the specified rectangular area
h - the height of the specified rectangular area
x - the x coordinate of the specified rectangular area
y - the y coordinate of the specified rectangular area
Returns:
true if this Shape contains the specified rectangluar area; false otherwise.
See Also:
Area, Shape.intersects(double, double, double, double)

contains

public boolean contains(Rectangle2D r)
Tests if the specified Rectangle2D is inside the boundary of this Shape.

Specified by:
contains in interface Shape
Parameters:
r - a specified Rectangle2D
Returns:
true if this Shape bounds the specified Rectangle2D; false otherwise.
See Also:
Shape.contains(double, double, double, double)

intersects

public boolean intersects(double x,
                          double y,
                          double w,
                          double h)
Tests if the interior of this Shape intersects the interior of a specified set of rectangular coordinates.

Specified by:
intersects in interface Shape
Parameters:
w - the width of the specified rectangular coordinates
h - the height of the specified rectangular coordinates
x - the x coordinate of the specified rectangular area
y - the y coordinate of the specified rectangular area
Returns:
true if this Shape and the interior of the specified set of rectangular coordinates intersect each other; false otherwise.
See Also:
Area

intersects

public boolean intersects(Rectangle2D r)
Tests if the interior of this Shape intersects the interior of a specified Rectangle2D.

Specified by:
intersects in interface Shape
Parameters:
r - the specified Rectangle2D
Returns:
true if this Shape and the interior of the specified Rectangle2D intersect each other; false otherwise.
See Also:
Shape.intersects(double, double, double, double)

getPathIterator

public PathIterator getPathIterator(AffineTransform at)
Returns a PathIterator object that iterates along the boundary of this Shape and provides access to the geometry of the outline of this Shape. The iterator for this class is not multi-threaded safe, which means that this GeneralPath class does not guarantee that modifications to the geometry of this GeneralPath object do not affect any iterations of that geometry that are already in process.

Specified by:
getPathIterator in interface Shape
Parameters:
at - an AffineTransform
Returns:
a new PathIterator that iterates along the boundary of this Shape and provides access to the geometry of this Shape's outline

getPathIterator

public PathIterator getPathIterator(AffineTransform at,
                                    double flatness)
Returns a PathIterator object that iterates along the boundary of the flattened Shape and provides access to the geometry of the outline of the Shape. The iterator for this class is not multi-threaded safe, which means that this GeneralPath class does not guarantee that modifications to the geometry of this GeneralPath object do not affect any iterations of that geometry that are already in process.

Specified by:
getPathIterator in interface Shape
Parameters:
at - an AffineTransform
flatness - the maximum distance that the line segments used to approximate the curved segments are allowed to deviate from any point on the original curve
Returns:
a new PathIterator that iterates along the flattened Shape boundary.

clone

public Object clone()
Creates a new object of the same class as this object.

Overrides:
clone in class Object
Returns:
a clone of this instance.
Throws:
OutOfMemoryError - if there is not enough memory.
Since:
1.2
See Also:
Cloneable